Christy's Red Hot Clear Glue - PERTH ONLY

Christy's Red Hot Clear Glue® is a very aggressive, deep blue medium bodied, very fast setting Low VOC PVC solvent cement. It is designed to be used on all schedules and classes of PVC pipe through 6”, schedule 80 through 4”. Red Hot Clear Glue® is ideal for both quick pressurization and demanding conditions (wet or cold weather). Red Hot Clear Glue® does not require the use of a primer, unless specified by local code.

Christy's Red Hot Clear Glue® is for use on rigid and flexible PVC plastic pipe and fittings. Approved for pressure and non-pressure, potable and nonpotable, water, turf, ag, conduit, foam core, sewer and DWV. In high pressure, large diameter or very demanding applications, use of a primer is recommended. Follow the pipe and fitting manufacturers directions in conjunction with our instructions to insure a viable joint is made. For cold weather guidelines see pg. 17 in our Guide to Solvent Welding.

• Contractor preferred, premium formulation
• Medium body, very fast set
• All classes and Schedules thru 6″ diameter interference fit (Schedule 80 through 4″)
• Can be used without primer if local codes permit for non-pressure systems up to 6″ and pressure
  systems below 4″
• Clear in color

SPECIFICATIONS

COLOR	Clear
BODY	Medium Body
MAXIMUM DIAMETER	For PVC pipe sizes thru 6″ all schedules and classes. Schedule 80 thru 4″
RELATIVE SET TIME	Very Fast Set
INDUSTRY LISTINGS
INDUSTRY PERFORMANCE SPECIFICATIONS	ASTM D-2564 NSF/ANSI 14, NSF/ANSI 61
COMPARE TO	IPS 795
AVAILABLE SIZES	Pint (#505209) Quart (#505210) Gallon (#505208)