icon Skip to content
FREE SHIPPING ON ORDERS OVER $100 AUSTRALIA-WIDE* (T&C's Apply - exc Bulky Items)
FREE SHIPPING ON ORDERS OVER $100 AUSTRALIA-WIDE* (T&C's Apply - exc Bulky Items)

Bianco MULTI103NXTP 2.20kW Multistage Pressure Pump with NXT Controller (Max 233LPM/490kPA)

by Bianco
PN: 808402
Original price $1,013.51 - Original price $1,013.51
Original price
$1,013.51
$1,013.51 - $1,013.51
Current price $1,013.51

Bianco MULTI103NXTP 2.20kW Multistage Pressure Pump with NXT Controller (Max 233LPM/490kPA)

 DOWNLOAD BROCHURE DOWNLOAD MANUAL

Ideal for domestic water supply for homes of all sizes, irrigation, car washing and general water transfer systems, these Bianco Pumpz horizontal multi-stage pressure systems are corrosion resistant with robust stainless steel construction. Suitable for water supply applications with suction wells, water supply and boosting of domestic systems, agricultural and gardening applications.

SPECIFICATIONS

Brand Bianco Pumpz
Product Type Pressure System
Suitable For Clean Water
Bar 4.8
Approval Drinking Water Approval
Amps 10.8
Flow Range Category c. 200 - 299 L/min
Flow Rate (L/min) 233
Float No
Hp 3
kPa 480
Kilo Watts 2.2
Max Flow (L/min) 233
Head Range Category b. 40 - 59 m
Max Head (m) 49
Port Size Inlet 1 1/2" BSPF inlet
Port Size Outlet 1 1/4" BSPM outlet
Powered Electric
Taps 23
Volts 240
Warranty (months) 24
Watts 2200

NXT PRO CONTROLLER

This pump includes the Bianco iCON nXt PRO series of pump controller.

The nXt PRO Controller is designed and tested in Australia to ensure operation in the toughest of environments, combining innovative technology with robust proven architecture to guarantee constant supply of pressurised water when and where you need it the most.

FEATURES

  • The new nXt Pro intelligent electronic pump control is fitted and wired to the pump with plug and play leads for automatic starting, stopping and restarting after power loss or water loss
  • The nXt Pro controller has an in-built check valve to prevent water back-flow through the pump
  • In MODE 1 the starting pressure can be adjusted and in MODE 2 both the starting and stopping pressures can be adjusted to fine tune the installation. A pressure tank is required for MODE 2.
  • Corrosion resistant pump body, diffuser and impeller
  • Mechanical shaft seal
  • Comes complete with plug and play leads
  • 240V single phase TEFC motor with in-built auto reset thermal overload
  • A pressure vessel must be used in Mode 2
  • Two operating modes: Mode 1 & Mode 2