AquaCo SEV17 Fully Automatic Water Softener (17,000 Litre/40LPM)

Water softeners are typically used for removing calcium carbonate, manganese, iron and hardness from water sources and are regenerated by brine solutions. The treated water is soft and non-scaling/staining.

Water softeners are designed to treat the water supply to the entire home and thereforre need to be connected to the main water supply to the property. It is advisable to segregate garden taps if possible. During regeneration a pre-determined capacity of saline water will be discharged to drain necessitating connection to a sewer/deep drain rather than storm water drain. Automatic models require a 240v general power outlet to operate. 

Automatic models are supplied with all parameters pre-set apart from the time of day. The time of dy can be set by pushing the "arrow up" or "arrow down" buttons untill the correct time is displayed. 

Salt usage - 4.5kg per regeneration. Every regeneration occurs every 8,500L at 200mg/l of hardness (2-3 months)

Please note bulk freight charges will apply. Contact us for freight quotation.

SPECIFICATIONS

• Type: Automatic water softener
• Capacity: 17,000 litres at 100mg/l hardness
• Resin capacity: 28L of high grade softening resin
• Control valve: Fleck 5000 microprocessor 5 stage with regeneration, fully adjustable and valve controls brine fill
• Pressure vessel: Thermowound fibreglass with blow moulded seamless liner
• Continuous flow rate: 35LPM 
• Max flow rate: 40LPM
• Minimum pressure: 175kPa (25 psi)
• Maximum pressure: 600kPa (85 psi)
• Inlet/outlet pipe size: 3/4" (20mm)
• Drain size: 1/2" (15mm)
• Salt storage: 50kg capacity
• Salt usage: 4.5kg per regeneration
• Dimensions: 1100mm H x 470mm W x 340mm D
• Weight: 47kg (dry)
• Voltage: 240v operation