MAIT Tank Fill & Monitoring Kit via Radio Communication

For the monitoring of tank levels. Radio communication between the PC and field site (6km line of site or further if multiple radio sites can be used as repeaters). Each board (BCL12S) can read two standard sensors such as level and camera. For remote monitoring via radio link.

The Mait Tank Fill & Monitoring Kit is a cutting-edge solution designed for efficient, wireless control and real-time monitoring of fluid tanks in remote or hard-to-access locations. Using reliable radio communication, this kit eliminates the need for manual checks or complicated wiring—boosting safety, speed, and precision.

KIT INCLUDES

• Radio Transmitter & Receiver Units
• Tank Level Sensor (Ultrasonic / Pressure-based options)
• Control Module (Relay Output or Valve Integration)
• Mounting Hardware & Weatherproof Enclosures
• Setup Guide & User Manual (Optional: Handheld Remote, Solar Panel Kit, Extra Sensor Inputs)

FEATURES

• 6 kilometres range each unit
• Each unit can repeat to communicate additional distance
• Mains power is not required
• Start/Stop pumps
• Open/Close Valves

APPLICATIONS

• Agricultural Water & Fertilizer Tanks
• Firefighting Water Reserves
• Construction Site Fuel or Water Tanks
• Industrial Fluid Storage Systems
• Municipal Water Management

SPECIFICATIONS

STAINLESS STEEL LEVEL SENSOR WL4-C5

• Pressure Range: 0-4mH20
• Overload Pressure: 1.5 Times Rated Pressure
• Fracture Pressure: 3 Times Rated Pressure
• Accuracy ±0.25%F.S, ±0.5%F.S, ±1.0%F.S
• Stability
  • Max.: 0.2% F.S/Year
  • Typical Value: 0.1%F.s
• Operating Temperature -40°C~85°C or -40 °C ~125 °C
• Compensation Temperature -10°C~70°C
• Medium Compatibility: All Caustic Medium CompatibleWith 316L

ELECTRICAL PROPERTIES

• Output Signal 4~20mA
• Power Supplies 10~30Vdc
• Load Resistance (U-10)/0.02()
• Insulation More Than 100M Ω @50V
• Electrical Connections
  • Waterproof Fixed Cable +
  • Two Rectangle Circle+Sealing
  • Rings+Seal Gum+ Pure Glue
  • Protection Grade : Ip68
• Pressure Interface G1/4,Input Type
• Response Time 10ms
• Electric Strength 500Vac@1 Second
• Graduate Certificate Programs: Certificate Of Explosion-Proof, CE
• Electromagnetic Compatibility
  • Electromagnetic Radiation
  • En50081-1/-2, Electromagnetic
  • Susceptibilty: En50082-2
• Lightning Protection Air Conduction Resistance 8000V Case, Cable Conduction

OPERATING CONDITIONS

• Battery Voltage +9V to +13.8V
• Operating Current:(12V supply, inputs open circuit, outputs off)
  • 0.3mA (Radio sleeping,
  • 12V sensor power disabled)
  • 10mA (Radio awake, idle)
  • 55mA (Radio transmitting)
• Additional current with 12V Sensor Power enabled in “unregulated” mode
  • 4mA approx
• Sensor Input Voltage: 0V to 3.3V
• Sensor Output Voltage: 12V
• Solenoid Output Current: 3A pulsed <500mA continuous