Netafim Spin Klin 50mm Compact Automatic Disc Filter with Controller - 880cm² (160-250LPM)

The 2″ Spin Klin™ Compact is a stand-alone, all polymeric automatic disc filtration system mainly used to protect irrigation emitters. The filters are based on our innovative disc technology that captures and retains a large amount of solids. Its unique and efficient hydraulic self-cleaning backwash mechanism requires low water consumption and saves energy demands. The discs are stacked on the Spin Klin spine and assembled according to pre-determined water filtration requirements. During filtration, the discs are compressed by means of a pre-loaded spring and differential pressure, forcing the water to pass through the grooved disc surface, thus trapping the solids.

2″ Spin Klin™ Compact delivers micron-precise depth filtration and long-term operation with minimal maintenance . It is simple to operate, has a short automatic backwash and permanently eliminates the need to replace filter media.

CONTROLLER

• AC - Netafim 1-10 controller c/w internal DP sensor is used with systems up to 10 filters more them 10 filter Techsys controller c/w DP will be used. All AC systems are supplied with Gemsol 24VAC 8W 3-Way N/C 2.4mm solenoids.
• DC - Netafim 1-10 controller c/w internal DP sensor is used with systems up to 10 filters more them 10 filter Techsys controller c/w DP will be used Aquativ 2-wire 3-way DC latch solenoids.

BACKWASH PROCESS

The Backwash Process Activated by a pre-determined time command or differential pressure, the filter enters backwash mode. The inlet valve port shuts as the drain valve port opens. Water flows through a bypass filter screen into the outlet valve and into the filter. During the backwash process, pressure is released and the spine’s piston elevates, releasing the compression on the discs. Tangential jets of filtered water are then forced through the nozzles positioned along the spine. At this stage the discs spin freely, loosening the trapped solids which are then flushed out.

*Please note: During backwash of the 2” Spin KlinTM Compact, downstream flow is suspended.

FEATURES

• Micron-precise filtration of solids
• Securely stacked disc for micron-precise filtration of solids
• Corrosive resistant spine
• Innovative 3 dimensional filter design captures and retains large amounts of solids for longer filtration cycles
• Short efficient backwash process conserves water and energy
• Easy and simple operation
• Long-term operation with minimal maintenance or cleaning

SPECIFICATIONS

• Filter Connection: 50mm threaded bsp
• Filter Sizes: 80 & 120 mesh
• Minimum Flow: 10m³/hr (166LPM)
• Maximum Flow: 15m³/hr (250LPM)
• Minimum Backwash Pressure: 280kPa
• Maximum Working Pressure: 1000 kPa
• Filtration Area: 880cm²
• Approximate Flush Time: 20 seconds
• Maximum Working Temperature: 60º C
• Filter Housing & Lid: RPA (reinforced polyamide)
• Disc Elements: PP (polypropylene)
• Backwash Valves: RPA (reinforced polyamide)
• Seals: NBR or EPDM
• Control Tubing: PE or PA