Toro Vortex Fogger Jets with 4mm Barbed Inlet 100 Pack

Toro Vortex Fogger produces a very fine spray that can be used for plant cooling and propagation. Toro's unique Vortex action produces a fine long cone shaped spray from a low pressure (100 kPa). Spray becomes ultra fine when operating at 300 kPa to 500 kPa.

At 100 kPa and above the Vortex Fogger will produce a very fine mist/fog spray At a pressure above 300 kPa the the Vortex Foggers spray becomes very fine Toro Vortex Fogger is ideal for cooling air temperauture or producing a very fine spray for the propagation of plants

Insert directly into PE tube by punching a 3mm hole or insert directly into 4mm I.D. micro PE tube Vortex Fogger can be operated in any direction (orientation). For cooling install Vortex Fogger to allow horizontal spray For propagating install 1.2m - 2.0m above and allow Vortex Fogger to spray downwards

TECHNICAL DATA

• Dimensions: 35mm (H) x 20mm (D) x 16.2mm (W)
• Inlet: 4mm Barb
• Micro Tube: 4.0mm I.D. Recommended
• Hole Punch: 3.0mm
• Min. Pressure: 100 kpa
• Max: Pressure: 500 kpa
• Nominal Pressure: 170 kPa
• Recommended Filtration: 8L/H - 80 mesh/200 micron 12L/H & 16L/H - 120 mesh/125 micron FLOW RATES (@ 170 kPa): Green Nozzle (0.43mm): 8L/H Black Nozzle (0.76mm): 12L/H Red Nozzle (1.07mm): 16L/H

COVERAGE - HORIZONTAL (@100-500 KPA)

• Green Nozzle: 1.9m -2.7m
• Black Nozzle: 2.6m - 2.9m
• Red Nozzle: 2.45m - 3.1m

COVERAGE - VERTICAL 2M OFF THE GROUND (@100-500kPa)

• Green Nozzle: 0.5m - 1.0m
• Black Nozzle: 0.5m - 1.2m
• Red Nozzle: 0.5m - 1.3m