Zenit AP BluePro 200 Series 1.50kW 240v High Head Drainge Pump (Max 420LPM/270kPa)

The Zenit AP BluePRO 200 is a robust, high-head submersible drainage pump designed for clear wastewater, rainwater, and seepage that contains small amounts of sand. With its high manometric head reaching up to 26.6 metres, this pump is a reliable solution for decorative fountains, water features, or any domestic or professional application that requires consistent high-pressure performance.

Equipped with a dry motor with thermal protection and a large oil sump, this single-phase model is built for dependable continuous-duty use. IECEx Zone 2 approval ensures safe operation in areas where explosive gases, vapours, or dust may be present.

FEATURES

• IECEx Zone 2 Certified — Safe for explosive atmospheres (II 3G Ex nA nC IIC T3 Gc)
• High Head Capability — Maximum head of 26.6 m for fountains and pressurised water transfer
• Heavy-Duty Hydraulic Section — Cast iron casing and impeller (EN-GJL 250) for long-term durability
• Stainless Steel Shaft (AISI 420) — Strong and corrosion-resistant with tapered coupling
• Dual Silicon Carbide Mechanical Seals (2SiC) — In direct contact with the liquid plus a protective V-ring
• Inspectable Oil Sump — Ensures mechanical seal longevity with easy access for servicing
• Ergonomic Technopolymer Handle — Lifting handle with clip for float switch attachment
• Innovative Cable Gland System — Twin O-ring design ensures secure sealing
• Impact-Resistant Intake Strainer — Polypropylene strainer with spheroidal cast iron foot for stability
• Threaded or Flanged Discharge — Flexible installation for different pipework configurations
• Quiet Submerged Operation — Acoustic pressure level below 70 dB

SPECIFICATIONS

• Brand: Zenit Pumps
• Series: BluePRO – AP High Head
• Power Supply: 240 V, 50 Hz (Single-phase)
• Rated Power (P2): 1.50 kW / 2.0 HP
• Max Flow Rate: 420 L/min (7 L/s)
• Max Head: 26.6 m (2.66 bar / 270 kPa)
• Current Draw: ~10.0 A
• Outlet Size: 1½” BSPF (DN 32 – G 1½” EN 1092-2)
• Impeller Type: High head impeller
• Free Passage: 6 mm
• Motor Poles: 2 Pole (~2750 RPM)
• Motor Type: Dry asynchronous motor with thermal protection and internal capacitor
• Duty Cycle: Continuous (S1)
• Max Liquid Temperature: 40°C
• pH Range: 6 – 14
• Max Fluid Density: 1100 kg/m³
• Max Starts per Hour: 30
• Max Immersion Depth: 10 m
• Noise Level: <70 dB (submerged)
• Ingress Protection: IP68
• Insulation Class: F
• Cable: 10 m with Shuko plug
• Construction Materials:
• Pump Casing & Impeller: Cast Iron EN-GJL 250
• Shaft: Stainless Steel AISI 420
• Seals: 2 x Silicon Carbide (2SiC) + V-Ring
• Gaskets: NBR
• Coating: Bi-epoxy 80 µm
• Screws: Stainless Steel A2-70
• Weight: ~27.3 kg (excluding cable & fixing system)
• Certification: IECEx Ex nA nC IIC T3 Gc
• Warranty: 2 Years (Parts & Labour)

APPLICATIONS

• Decorative fountains and garden water features
• High-pressure rainwater drainage and seepage control
• Domestic or commercial clear wastewater pumping
• Garden ponds and small irrigation systems
• Approved for hazardous sites such as car parks, bus depots, truck stops, garages, and workshops