Fimco Cyclomatic Hydro Indexing Valves

A reliable, economical way to automate multiple zoned residential and commercial irrigation systems. No electric wiring is required to the valve.

FEATURES

• PVC body with Fiberfill bonnet (reclaimed water identification)
• Pre-assembled with sequencing cam depending on zone requirement
• Easily replaced cam through top of valve
• Union connection between inlet supply and valve
• No electric wiring required at valve
• Zone cams can be fitted to allow complete flexibility over watering system

SPECIFICATIONS

• For flow rates under 37lpm use low flow stem & disc assemblies (see models chart)
• Minimum flow using low flow stem & disc - 23lpm
• Flow range model F1004 - 37lpm to 90lpm
• Flow range model F1006 - 37lpm to 90lpm
• Flow range all models F600F - 132lpm to 283lpm
• Pressure loss through all models - 14kPa to 28kPa
• Minimum operating pressure - 100kPa
• Maximum operating pressure - 551kPa
• Inlet & outlet ports are slip requiring use of solvent cement

OPERATION

The hydro indexing valve is activated by insufficient water supply being turned on and off . No electric wiring is required to the valve. Each time the water supply is turned on a zone will water. Each time the water supply is turned off the valve is indexed to the next zone ready for next on signal. To automate the indexing valve, the use of a pump or master solenoid valve with controller is required, each time the pump or master valve is activated a zone will water. The number of zones will determine your type of controller ie: if you have a six zone indexing valve you will require a controller that allows 6 cycle starts