Skip to content
Matelec FPC-12650 Liquid Level Alarm Standard with Audio Buzzer
Matelec FPC-12650 Liquid Level Alarm Standard with Audio Buzzer
| DOWNLOAD OPERATIONS MANUAL |
NOTE: Float switch not included - optional extra
The Matelec Liquid Level Alarms are designed to provide warning indication when storage (Effluent, Grey Water or Rain Water etc) tank is either empty or full.
Warning indication is determined by a float switch. Warnings are; Audio (buzzer), Visual (LED Pilot Light and/or Strobe). The Buzzer can be muted via a mute button. If not muted the Audible buzzer will automatically silence after 5 minutes. If a continuously sounding audible alarm is required, this can be done by changing the Jumper position on the circuit board.
The visual alarms will continue to remain on, until the alarm condition is eradicated.
A standard feature of the Level Alarm is a ‘Voltage Free’ (5Amp rated) output for connection to auxiliary devices.
Controller can be installed up to 50m from the tank being monitored. Float Switch cabling is ‘safe’, low voltage circuitry.
- Designed to provide warning indication when storage (Effluent, Grey Water, Rain Water etc) tank is either empty or full
- Warning condition determined by a Float switch
- Warning alarms are: Audio - buzzer
Visual - LED Pilot Light + strobe in Deluxe model - The buzzer can be muted via the mute button. The visual alarms will remain on until alarm condition is eradicated
- If not muted the audible buzzer will automatically silence after 5 minutes. If a continuously sounding audible alarm is required, this can be done by changing the Jumper position.
- Controller can be installed up to 50m from the tank being monitored. Float Switch cabling is ‘safe’, low voltage circuitry.
FEATURES
-
Enclosure:
- IP54 rated, poycarbonate enclosure
-
Protection:
- Low voltage control and input circuitry
-
Control & interface:
- Audible (buzzer) alarm
- Level alarm keypad interface:
- Indicator lights for power on, level alarm
- Alarm mute/reset/test button
- Level alarm PCB control module
-
Inputs:
- Single phase (230Vac) power supply
- Digital 12Vdc input for float switch or conductivity probes
- BMS volt free output for common fault (NO & NC)
- 10 Amp 3 pin 1m power supply lead (230Vac)
Function Features
- Level alarm - Provides warning indication and alarm when a water storage tank is empty or full
- Auto-silencing alarm - If not muted, the buzzer will silence after 5 minutes, then sound briefly every 5 minutes (this feature can be disabled if a continuous alarm is required)