Grundfos Unilift AP35-40-06-AV1 0.60kW Submersible Vortex Drainage Pump (Max 300LPM/90kPa)

The Grundfos Unilift AP35-40-06-AV1 Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 3-phase totally enclosed motor in insulation class F. The pump is fitted with a suction strainer. The pump is supplied with a control box including motor starter, a motor protection and a float switch for automatic start/stop of the pump . The float switch contains 10 m cable. And there is a 0.8m maine cable connected to the box (see electrical data for optional CEE plug).

The impeller is a VORTEX impeller for groundwater, surface water, rain water and similar liquids. The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil. The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and long-life deep-groove greased-for-life ball bearings.

The pump is ready for use as it is fitted with carrying handle and is supplied with a 10 m mains cable. The mains cable is of the plug type with glass sealing compound in the socket to prevent penetration of humidity into the stator windings.

SPECIFICATIONS

• Maximum flow: 4.17l/s
• Maximum head: 10m
• Max particle: 35mm
• Rated speed: 2795 rpm
• Pump housing: Stainless Steel
• Impeller: Stainless Steel
• Cable union: Brass
• Range of ambient temperature: 0..55°C
• Size of connection: 1 1/2 inch
• Maximum installation depth: 7m
• Liquid temperature range: 0..55°C
• Rated voltage: 1 x 230v
• Rated current: 3.1A
• Length of power cable: 10m
• Float switch included: Yes