Hyderpro R12000LPD 2 x 4040 Packaged Commercial Reverse Osmosis RO Filtration System with Econnect Online Access (Max 500LPH)

The Advanced Ecosoft MO6500TP6 provides up to 300 litres per hour of purified water, removing up to 99.8% of impurities. Paired with the Econnect OC6000 controller, allowing operators to gain online, remote access to the RO machine from phone or desktop connectivity. Typically used with steam boilers, heating/cooling circuits, breweries and beverage production, livestock and poultr farms, laundry and car wash etc.

The Advanced MO6500TP6 comes with the Grundfos CM 1-10 pump which has a worldwide guarantee, Filmtec XLE-4040 membranes (or Ecosoft’s ELP-4040 membranes), the BB10 sediment pre-filter as standard and Danfoss solenoid valves. It’s universal design also allows for the connecting of permeate flushing and raw water blending. The Advanced MO12000 4″ is also mounted on an AISI 304 stainless steel frame.

The Econnect OC6000 controller has Econnect functionality, allowing operators to gain online, remote access to the controller from a smart device. Users can remote access all options, such as:

• measure flow rate and volume of purified water
• control quality of feed water and treated water
• enter purified water discharge mode
• gain remote updates of firmware

The OC6000 remote capabilities are an ideal solution for busy professionals who need to maintain and monitor their water treatment system when not within the same location. It is also ideal for managing multi-site solutions.

EQUIPMENT:

• Grundfos® CM 1-10 pump
• 300 psi membrane vessel
• BB20 sediment prefilter
• Electrical panel with Ecosoft controller
• Danfoss solenoid valves
• Piping, instrumentation
• Steel frame
• Carton crate
• PP melt blown sediment filter, 5 micron

OPTIONS:

• Filmtec™ ХLE-4040 / LCLE-4040 or Ecosoft ELP-4040 membrane
• Dosing pump for antiscalant
• Versatile set for raw water blending (30...240 L/h) or permeate flushing

CONNECTIONS:

• influent water: ½"
• permeate: ½"
• concentrate: ½"
• antiscalant dosing port: ½″
• permeate flushing input port: ½"

SPECIFICATIONS:

• Permeate capacity*: 250 L/h
• Permeate recovery**: 75%
• Maximum TDS: 3000 mg/L
• Influent flow demand
  - 320…400 L/h (service)
  - 1500…2000 L/h (rinse)
• Operation pressure: 8…12 bar
• Maximum pressure: 14 bar
• Electrical requirements: 230 V, 50 Hz (1 ph)
• Electrical power: 0.7 kW
• Prefilter rating: 5 μm

* depends on feed water TDS, temperature, and permeate recovery
** for low scaling/fouling water

FEED WATER REQUIREMENTS: 

• Influent water temperature: +5...+40 °С
• Residual chlorine, max :0.1 mg/L
• Hardness: up to 3 meq/L (150 mg/L CaCO₃)
• Iron: up to 0.1 mg/L
• Manganese: up to 0.05 mg/L
• Silicate: up to 20 mg/L
• Chemical oxygen demand, max: 4.0 mg О₂/L
• Hydrogen sulfide: none

The limitations may be exceeded if using antiscalant, oxygen scavenger, or other RO chemical pretreatment.

APPLICATIONS: 

• Steam boilers
• Heating and cooling circuits
• Breweries and beverage production
• Livestock and poultry farms
• Glazing factories
• Laundry and car wash

PHYSICAL PARAMETERS:

• Influent water, concentrate, permeate G ½″
• Antiscalant dosing port G ½″
• Permeate flushing input port G ½″
• Approx. weight (bare system / crate) 55kg / 80kg
• Dimensions (bare system, W x D x H) 0.55m x 0.42m x 1.50m
• Dimensions (crate, W x D x H) 0.60m x 0.50m x 1.65m