Puretec MB Series | Melt Blown / Dual Graded Cartridge

The Puretec MB Series cartridges can be used with many liquids and are very effective for sediment, rust, sand, silt and algae removal. These cartridges do not impart taste, odour or colour to the liquid being filtered. The polypropylene construction provides superior chemical resistance and is not prone to bacterial attack.

The MB Series graded density filter design means that the filter is more dense towards the centre of the filter. This increased depth ensures extremely high sediment reduction efficiencies and longer cartridge life.

Specification

• Rating : 5 Micron
• Size : 10"
• Min/Max Temp : 0-50°C
• Min/Max Press : 100-800kPa
• Min/Max Flow : 0-26 Lpm

Reduces

Filter to effectively reduce the sediment, chlorine, taste & odours.

• 99.30% of Lead at pH 6.5
• 99.90% of Lead at pH 8.5
• 94.50% of Mercury at pH 6.5
• 96.60% of Mercury at pH 8.5
• 97.60% of Partculates (Class 1) 
• 89.60% of Benzene
• 99.90% of P-Dichlorobenzene
• 99.99% of Cysts
• 98.70% of Carbofuran
• 97.00% of Chlorine
• 99.10% of Turbidity

Reduces the following contaminants:

2,4-Dichlorophenoxyacetic Acid (2,4-D)

Asbestos/ Atrazine/ Benzene/ Carbofuran/ Chlorine Taste & Odor/ Toxaphene

Lead at pH 6.5/ Lead at pH 8.5/ Lindane/ Mercury at pH 6.5/ Mercury at pH 8.5

Particulates (Class I)

Toxaphene

Chemical and Mechanical ReductionTested and Certified by NSF International against NSF/ANSI Standards 42 for the reduction of Chlorine Taste and Odour. Toxaphene

Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The contaminants or other substances removed or reduced by the water filter device are not necessarily in your water.