Amiad Fertiliser Injector 4-01 Injector Suction Type Auto Cut Out: Includes Auto Cut-Out

Suction type injector, suction head inserted to tank top. injection flow rate, up To 320 liters/hr [1.4 GPM] For drip and micro irrigation systems.fertilizers pump Injector control: Manual red button on/off operation. Automatic cutoff when chemical level is too low.

Amiad hydraulic fertilizer injector is constructed from corrosion and chemical resistant materials. The unit is resistant to nearly all known chemicals presently used in agriculture and horticulture.Amiad hydraulic fertilizer injector needs no external power to operate. Its linear hydraulic motor is powered by the hydraulic pressure of the irrigation system. The injector uses this pressure as the energy source for injecting fertilizer to the pressurized irrigation lines. Liquid fertilizer enters the injector through the Suction Port and is injected to the downstream irrigation line through the injection line. The water consumption of the hydraulic motor is 3 times the quantity of the chemical injected and can produce an injection rate of up to 1.4 gpm (320 liter/hour). The Injector is supplied ready to operate. The user has to supply two ¾” manual valves, one for the Drive-water port and the other for the Injection port. A 25 mm drainage line should be also connected to the injector’s Water-exhaust port.

The fertilizer and chemical injector needs no external power supply, since the linear hydraulic motor contained within the unit, is powered by the hydraulic pressure of the irrigation system. The unit is resistant to nearly all known chemicals used in agriculture and horticulture. 

Suction pump type 4-01 (300000-000011) with suction head at the end of the suction pipe. Suitable for working with fertilizer tanks of less than 1 m3

Fertilizer injectors in irrigation system, Hydraulic injectors. 

• Water driven chemical Fertilizers injectors that need no external power supply
• Does not cause pressure loss in the irrigation line.
• Operation begins at low pressure.
• Simple operation, adjustments and maintenance.
• Chemical resistant To nearly all known chemicals used in agriculture.
• Irrigation chemical injection flow rate, up To 640 liters/hr [2.8 US GPM]
• Minimum pressure   0.5 bar; 7 psi  Maximum pressure 8 bar; 115 psi
• Water consumption ~ 3 times the quantity of the chemical injected.
• Ideal for Fertilizers, Herbicides, Insecticides, Fungicides, Soil Saturants, Trace Elements, Nutrient Solution, Acids (for desolating drip systems), etc