Zenit DR Blue 100 Series 240v Heavy Duty Drainage Pumps (Max 330LPM/140kPa)

The Zenit DR Blue 100 Series is a high-capacity, heavy-duty submersible drainage pump built for continuous operation in demanding environments. With a flow rate of up to 330 litres per minute and a total dynamic head of 14 metres, this pump is well-suited for moving clear or slightly soiled water in hazardous or non-hazardous applications.

Constructed with a cast iron impeller and strainer, stainless steel shaft, and technopolymer outer casing, this pump offers excellent resistance to wear and corrosion. It is also IECEx Zone 2 certified, ensuring compliance in potentially explosive environments such as garages, car parks, and workshops.

FEATURES

• IECEx Zone 2 Certified – approved for use in areas with occasional presence of explosive gases or vapours
• High Flow Performance – up to 330 L/min with 14 metres max head
• Multi-Vane Open Impeller – designed to pass solids up to 7 mm
• Technopolymer Handle and Cable Gland System – durable and ergonomic for easy transport and sealing
• Dual Mechanical Seals – SiC and AL with V-ring in contact with pumped liquid
• Oil Bath Seal Chamber – extends mechanical seal life and simplifies servicing
• Anti-Clogging Diffuser Design – features grooves to eject solids and prevent blockages
• Impact-Resistant Strainer – made from reinforced polypropylene
• Quiet Operation – under 70 dB when submerged
• S1 Continuous Duty – ideal for permanent installations and heavy workloads
• 10m Power Cable – fitted with Shuko plug for convenience

SPECIFICATIONS

• Power Supply: 240 V, 50 Hz
• Rated Output: 0.74 kW / 1.0 HP
• Max Flow Rate: 330 L/min
• Max Head: 14 m (1.4 bar / 140 kPa)
• Current Draw: 5.6 A
• Capacitor: Integrated
• Outlet Size: 1¼" BSPF
• Impeller Type: Multi-channel open
• Free Passage: 7 mm
• Motor Type: Asynchronous dry motor with built-in thermal protection
• Duty Cycle: Continuous (S1)
• Max Liquid Temperature: 40°C
• pH Range: 6 to 14
• Max Liquid Density: 1100 kg/m³
• Max Starts per Hour: 30
• Noise Level: <70 dB
• Ingress Protection: IP68
• Insulation Class: F
• Cable: 10 m (3G1) with Shuko plug
• Weight: 15.5 kg
• Certification: IECEx – Ex nA nC IIC T3 Gc
• Warranty: 2 Years (Parts & Labour)

APPLICATIONS

• High-volume drainage in vehicle service areas, bus depots, and workshops
• Rainwater and groundwater removal in commercial, agricultural, and construction sites
• Pumping strained wastewater from underground pits, basements, and tanks
• Hazardous environments with IECEx Zone 2 compliance requirements
• Industrial dewatering and water transfer operations